Time Switches

Many Models in stock

Mi 14
In-Wall Time Switch
- Ratings: 20 A -125 Vac 10 A -277 Vac
- Ratings: 7 A tungsten 125 Vac
- Ratings: 1 HP 125 Vac and 2 HP 250 Vac
- Switching configurations: SPST, DPST, SPDT, N.O. or N.C.
- Hold position CCW.
- Distance between open contacts >, 3 mm.
- Life: 6,000 cycles.
- Dielectric strength: 2.500 V 50 Hz.
- Internal screw clamp terminals.

Timer
- Timing from 1 minute to 12 hours.
- Temperature range: -30°C to + 125°C (-20°F to 260°F)
- Special spindle sizes available.
- Several wind-up angles available.

Mounting instructions
- Mountable in a standard electric outlet/switch box.
- Panel mountable. .....APPROVALS: UL, CSA.

Mi 2
Switch
- Ratings 16 A -250 V.
- One to four poles.
- Switching configurations: SPST and DPST N.O or N.C.,
- SPDT and DPDT delayed switches.
- Hold position CCW or end of wind up angle.
- Distance between open contacts >, 3 mm.
- Life: 10.000 cycles.
- Dielectric strength: 2.500 V 50 Hz.
- Side or rear 6.35 x 0.8 mm tab terminals.

Timer
- Timing from 1 minute to 14 hours.
- Temperature range: -30°C to + 125°C (-20°F to 260°F)
- Special spindle sizes available.
- Several wind-up angles available.
- Single ding available after cycle.

Mounting instructions
- Both center stud mount or 2 screw mount on 1.125 centers. APPROVALS: UL, CSA

Mi 7
Switch
- Ratings 16 A -125 V.
- One to two poles.
- Switching configurations: SPST and DPST N.O or N.C.
- Hold position.
- Distance between open contacts >, 3 mm.
- Life: 10.000 cycles.
- Dielectric strength: 2.500 V 50 Hz.
- Side or rear 6.35 x 0.8 mm tab terminals.

Timer
- Timing from 1 minute to 120 minutes.
- Temperature range: -30°C to + 125°C (-20°F to 260°F)
- Special spindle sizes available.
- Several wind-up angles available.
- Single ding available after cycle.

Mounting instructions
- Both center stud mount or 2 screw mount.
- Standard centers: 1.125 .....APPROVALS: UL, CSA.

IFG Instruments Inc.
711 Prospect Ave., Barrington, IL 60010
Phone: 847-381-8200 | Fax: 847-382-2549
TOLL FREE: 1-800-927-7358
E-mail: ifginstruments@aol.com

Time Switches, IFG, Hairsprings, CNC Machining & Grinding, time switches, pinions and gears, timers, timer, mechanisms, mechanism, spring wound timer, spring wound timers, electromechanical timers, electromechanical timer, mechanical timer, mechanical timers, time switch, time switches, precision components, hairspring, hairsprings, inwall timers, inwall timer, wallbox timer, wallbox timers, spring wound time switch, spring wound time switchs, mechanical time switch, mechanical time switches